Engine Control Module: Service and Repair

How to Remove the ECM/PCM for Testing

If DTC troubleshooting requires voltage or resistance checks at the ECM/PCM connectors, remove the ECM/PCM and test it:

1. Jump the SCS line with the HDS.




2. Remove the center lower covers (A).
3. Remove the duct (B).
4. Disconnect the ECM/PCM connectors (C).
5. Remove the bolts (D), then remove the ECM/PCM (E).
6. Install the ECM/PCM in the reverse order of removal.
7. Open the SCS line with the HDS.