B1140

DTC B1140: Driver's Power Window Position Detect Circuit Error

1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF and then back ON (II).
3. Open and close the driver's power window by using the driver's switch manually.
4. Check for DTCs using the HDS.

Is DTC B1125 or B1126 indicated?

YES - Troubleshoot the DTC B1125 or B1126.

NO - Go to step 5.

5. Do the power window control unit reset procedure.
6. Check for DTCs again using the HDS.

Is DTC B1140 indicated?

YES - Faulty door multiplex control unit; replace the power window master switch.

NO - The system is recovered at this time.